Alcatel-Lucent 7210 SAS M Interface Configuration Guide

Interface Configuration
7210 SAS M, T, X, R6, R12, Mxp Interface Configuration Guide Page 99
the cards specified by allow-imm-family and the IMM cards provisioned/equipped in the chassis,
it will throw an error as shown below.
*A:NS140500018# /configure system chassis allow-imm-family ?
- allow-imm-family <imm-family>
- no allow-imm-family
<imm-family> : imm-sas-r|imm-sas-r-b
*A:NS140500018# /configure system chassis allow-imm-family imm-sas-r-b
INFO: CHMGR #4004 Configuration changes successful. Reboot the chassis for configuration
to take effect.
For a list of supported cards per family use the command:
*A:sasr_dutb>show>system# chassis imm-family all
===============================================================================
IMM FAMILY INFORMATION
===============================================================================
IMM-TYPE IMM-FAMILY SUPPORTED
-------------------------------------------------------------------------------
imm-sas-10sfp+1xfp imm-sas-r Default
imm-sas-10sfp imm-sas-r Default
imm-sas-2xfp imm-sas-r Default
imm-sas-b-4sfp+ imm-sas-r-b ----
imm-sas-b-2sfp+ imm-sas-r-b ----
imm-sas-b-10sfp-1sfp+ imm-sas-r-b ----
imm-sas-b-11csfp imm-sas-r-b ----
imm-sas-b-16tx imm-sas-r-b ----
===============================================================================
*A:sasr_dutb>show>system#
To show the list of IMM cards allowed in the chassis based on the configure value of allow-imm-
family, use the command:
*A:sasr_dutb>show>system# chassis imm-family configured
===============================================================================
IMM FAMILY INFORMATION
===============================================================================
IMM-TYPE IMM-FAMILY SUPPORTED
-------------------------------------------------------------------------------
imm-sas-10sfp+1xfp imm-sas-r Default
imm-sas-10sfp imm-sas-r Default
imm-sas-2xfp imm-sas-r Default
===============================================================================
*A:sasr_dutb>show>system#
NOTE: For more information about upgrading the chassis to use IMMv2 cards, see the “7210
SAS Installation Guide”.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English