Alcatel-Lucent 7210 SAS M - Deleting a Card; Deleting Port Parameters

Service Management Tasks
Page 112 7210 SAS M, T, X, R6, R12, Mxp Interface Configu-
ration Guide
Deleting a Card
The delete operation cannot be performed on an IOM card that is auto equipped and auto
provisioned during bootup and is fixed.
CLI Syntax: config> port port-id
shutdown
CLI Syntax: config> card slot-number
card-type card-type
mda mda-number
no mda-type mda-type
no shutdown
Deleting Port Parameters
Use the following CLI syntax to delete a port provisioned for a specific card:
CLI Syntax: config>port port-id
shutdown
no port port-id