Alcatel-Lucent 7210 SAS M - Page 227

Hardware Commands
Page 222 7210 SAS M, T, X, R6, R12, Mxp Interface Configuration
Guide
===============================================================================
Chassis Information
===============================================================================
Power Supply Information
Number of power supplies : 2
Power supply number : 1
Configured power supply type : ac single
Status : up
AC power : within range
Over temp : within range
Input power : within range
Output power : within range
Power supply number : 2
Configured power supply type : ac single
Status : up
AC power : within range
Over temp : within range
Input power : within range
Output power : within range
===============================================================================
*A:7210-SAS-X>show#
card
Syntax card [slot-number] [detail]
card state
Context show
Description This command displays card information.
If no command line parameters are specified, a card summary for all cards is displayed.
Parameters slot-number — Displays information for the specified card slot.
Default Displays all cards.
Values state
Displays provisioned and equipped card and MDA information.
detail — Displays detailed card information.
Default Displays summary information only.