Alcatel-Lucent 7210 SAS M Interface Configuration Guide

Hardware Commands
Page 226 7210 SAS M, T, X, R6, R12, Mxp Interface Configuration
Guide
A sfm-sas sfm-sas up up Active
===============================================================================
A:7210-SAS-X>
Show Card Detail Output — The following table describes detailed card output fields.
Label Description
Available MDA
slots
The number of MDA slots available on the IOM.
Installed MDAs
The number of MDAs installed on the IOM
Part number
The IOM part number.
CLEI code
The Common Language Location Identifier (CLLI) code string for the
router.
Serial number
The serial number. Not user modifiable.
Manufacture date
The chassis manufacture date. Not user modifiable.
Manufacturing
string
Factory-inputted manufacturing text string. Not user modifiable.
Manufacturing
deviations
Displays a record of changes by manufacturing to the hardware or soft-
ware and which is outside the normal revision control process.
Administrative
state
Up — The card is administratively up.
Down — The card is administratively down.
Operational
state
Up — The card is operationally up.
Down — The card is operationally down.
Temperature
Internal chassis temperature.
Temperature
threshold
The value above which the internal temperature must rise in order to
indicate that the temperature is critical.
Software boot
version
The version of the boot image.
Software version
The software version number.
Time of last
boot
The date and time the most recent boot occurred.
Current alarm
state
Displays the alarm conditions for the specific board.
Base MAC address
Displays the base MAC address of the hardware component.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English