7705 SAR Interfaces
7705 SAR OS Interface Configuration Guide Page 105
Network Port Commands
network
Syntax network
Context config>port>ethernet
config>port>tdm>ds1
config>port>tdm>e1
Description This command enables access to the context to configure network port parameters.
queue-policy
Syntax queue-policy name
no queue-policy
Context config>port>ethernet>network
config>port>tdm>ds1>network
config>port>tdm>e1>network
Description This command specifies the network queue policy that defines queue parameters such as CBS, high-
priority-only burst size, MBS, CIR, and PIR rates, as well as forwarding class-to- queue mappings.
The network queue policy is defined in the config>qos>network-queue context. Refer to the 7705
SAR OS Quality of Service Guide for more information.
Default default
Parameters name — specifies an existing network queue policy name
To Next Page
Loading...
