Card, Adapter Card, and Port Command Reference
Page 186 7705 SAR OS Interface Configuration Guide
• Table 28: "Show Port ATM PVC VPI/VCI Detail Output Fields"
• Table 29: "Show Port ATM PVP Output Fields"
• Table 30: "Show Port ATM PVP Detail Output Fields"
Table 24: Show Port ATM Output Fields
Label Description
Cell Mode The cell format (UNI or NNI) that is used on the ATM interface
(NNI is not supported on SONET/SDH ports)
Configured VCs The number of configured VCs
Configured VTs The number of configured VTs
Configured
minimum VPI
The configured minimum allowable VPI value that can be used on
the ATM interface for a VPC
Last Unknown
VPI/VCI
The last unknown VPI/VCI that was received on this interface
Mapping Direct — direct ATM cell mapping is used
PLCP — PLCP ATM cell mapping is used
Configured VPs The number of configured VPs
Configured IFCs The number of configured IFCs
TC Alarm State The ATM interface notifications indicating that the TC sublayer is
currently in the Loss of Cell Delineation (LCD) defect maintenance
state or that the TC sublayer is currently not in the Loss of Cell
Delineation (LCD) defect maintenance state
HEC Errors
(Dropped)
The number of cells with uncorrectable HEC errors on this interface
Number OCD Events The number of times the Out of Cell Delineation (OCD) events
occurred
HEC Errors
(Fixed)
The number of cells with correctable HEC errors on this interface
Ingress CBR The total CBR bandwidth consumed on this interface in the ingress
direction
Ingress RT-VBR The total real-time variable bit rate (rt-VBR) bandwidth consumed on
this interface in the ingress direction
Ingress NRT-VBR The total non-real-time variable bit rate (nrt-VBR) bandwidth
consumed on this interface in the ingress direction
Ingress UBR The total unspecified bit rate (UBR) bandwidth consumed on this
interface in the ingress direction
To Next Page
Loading...
