Card, Adapter Card, and Port Command Reference
Page 214 7705 SAR OS Interface Configuration Guide
Port Monitor Commands
port
Syntax port port-id [port-id...(up to 5 max)] [interval seconds] [repeat repeat] [absolute | rate]
Context monitor
Description This command enables port traffic monitoring. The specified port(s) statistical information displays at
the configured interval until the configured count is reached.
The first screen displays the current statistics related to the specified port(s). The subsequent
statistical information listed for each interval is displayed as a delta to the previous display.
When the keyword rate is specified, the “rate per second” for each statistic is displayed instead of the
delta.
Monitor commands are similar to show commands, but only statistical information displays. Monitor
commands display the selected statistics according to the configured number of times at the interval
specified.
Parameters port-id — specifies up to 5 port IDs
Syntax: port-id slot/mda/port[.channel]
bundle IDbundle-type-slot/mda.bundle-num
bundle keyword
bundle-num: 1 to 16 (up to 8 for MLPPP and IMA)
type ima, ppp
seconds — configures the interval for each display in seconds
Default 5 seconds
Values 3 to 60
repeat — configures how many times the command is repeated
Default 10
Values 1 to 999
absolute — when the absolute keyword is specified, the raw statistics are displayed without
processing. No calculations are performed on the delta or rate statistics.
rate — when the rate keyword is specified, the rate-per-second for each statistic is displayed instead
of the delta
To Next Page
Loading...
