Card, Adapter Card, and Port Command Reference
Page 154 7705 SAR OS Interface Configuration Guide
Table 15: Show Specific Port Output Fields (Ethernet Port)
Label Description
Ethernet Interface
Description A text description of the port
Interface The port ID displayed in the slot/mda/port format
Link-level The type of link for which the port is configured
Admin State Up — the administrative state is up
Down — the administrative state is down
Oper State Up — the operating state is up
Down — the operating state is down
Physical Link Yes — a physical link is present
No — a physical link is not present
IfIndex The interface's index number, which reflects its initialization sequence
Last State
Change
The last time that the operational status of the port changed state
Last Cleared
Time
The time since the last clear
Configured Mode network — the port is configured for transport network use
access — the port is configured for service access
Dot1Q Ethertype The Ethertype expected when the port's encapsulation type is dot1q
Ing. Pool % Rate The amount of ingress buffer space, expressed as a percentage of the
available buffer space, that will be allocated to the port or channel for
ingress buffering
Net. Egr. Queue
Pol
default — the default policy is used
network — the network egress queue policy is used
Egr. Sched. Pol The egress scheduling policy
Auto-negotiate True — the link attempts to automatically negotiate the link speed
and duplex parameters
False — the duplex and speed values are used for the link
Egress Rate The maximum amount of egress bandwidth (in kilobits per second) that
this Ethernet interface can generate
To Next Page
Loading...
