Alcatel-Lucent 7705 - Monitoring Temperature; Card Temperatures

7705 SAR Interfaces
7705 SAR OS Interface Configuration Guide Page 51
ALU-1>config>card# mda 6
ALU-1>config>card>mda# mda-type a8-eth
ALU-1>config>card>mda# exit
Use the config info command to display card configuration information.
ALU-A>config# info
. . .
#--------------------------------------------------
echo "Card Configuration"
#--------------------------------------------------
card 1
card-type iom-1g
mda 1
mda-type a4-oc3
exit
mda 2
mda-type a4-oc3
exit
mda 3
mda-type a16-chds1
exit
mda 4
mda-type a16-chds1
exit
mda 5
mda-type a8-eth
exit
mda 6
mda-type a8-eth
exit
exit
#---------------------------------------------------
ALU-A> config#
Configuring Adapter Card Network Parameters
Network policies can optionally be applied to adapter cards. Network queue policies define
the ingress network queuing at the adapter card node level. Network queue policies are
configured in the config>qos context. For more information, refer to the 7705 SAR OS
Quality of Service Guide.
Use the following CLI syntax to configure network queue policies on an adapter card.
CLI Syntax: config>card>mda#
network
ingress
queue-policy name
no shutdown
no shutdown