7705 SAR Interfaces
7705 SAR OS Interface Configuration Guide Page 147
Show Port Commands
port
Syntax port port-id [count] [detail]
port port-id acr [detail]
port port-id description
port port-id associations
port port-id ppp [detail]
port port-id ethernet [efm-oam | detail]
Context show
Description This command displays port or channel information.
If no command line options are specified, the command port displays summary information for all
ports on provisioned adapter cards.
Parameters port-id — Specifies the physical port ID
Syntax port-id slot[/mda[/port]] or slot/mda/port[.channel]
Values slot 1
mda 1 to 6
port 1 to 4 (4-port OC3/STM1 Clear Channel Adapter card ports)
1 to 16 (T1/E1 ASAP Adapter card ports)
1 to 8 (Ethernet Adapter card ports)
channel ds1 or e1 (for config>port>tdm information)
1 to 24 (DS1) or 1 to 32 (E1) (for config>port>tdm>channel-group
information
acr — displays ACR-capable port information
associations — displays a list of current router interfaces to which the port is associated
count — displays only port counter summary information
description — displays port description strings
ethernet — displays Ethernet port information
efm-oam — displays EFM OAM information
detail — displays detailed information about the Ethernet port
ppp — displays PPP protocol information for the port
detail — provides detailed information
To Next Page
Loading...
