7705 SAR Interfaces
7705 SAR OS Interface Configuration Guide Page 165
Hold time down The link-down dampening time in seconds. The down timer
controls the dampening timer for link down transitions.
Configured Mode network — the port is configured for transport network use
access — the port is configured for service access
Encap Type Null — ingress frames will not use any tags or labels to
delineate a service
dot1q — ingress frames carry 802.1Q tags where each tag
signifies a different service
Dot1Q Ethertype The protocol carried in an Ethernet frame
Net.Egr. Queue Pol. Number of the associated network egress queue QoS policy, or
default if the default policy is used
Auto-negotiate True — the link attempts to automatically negotiate the link
speed and duplex parameters
False — the duplex and speed values are used for the link
Egress Rate The maximum amount of egress bandwidth (in kilobits per
second) that this Ethernet interface can generate
Configured Address The base chassis Ethernet MAC address
Hardware Address The interface’s hardware or system assigned MAC address at its
protocol sub-layer
Traffic Statistics Octets input/output – the total number of octets
received and transmitted on the port
Packets input/output – the number of packets, delivered
by this sub-layer to a higher (sub-) layer, which were not
addressed to a multicast or broadcast address at this sub-layer.
The total number of packets that higher-level protocols requested
be transmitted, and which were not addressed to a multicast or
broadcast address at this sub-layer, including those that were
discarded or not sent.
Table 17: Show Port Detail Output Fields (Ethernet - Access Mode) (Continued)
Label Description
To Next Page
Loading...
