EasyManua.ls Logo

Alcatel-Lucent 7705 - Page 167

Alcatel-Lucent 7705
226 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7705 SAR Interfaces
7705 SAR OS Interface Configuration Guide Page 167
Fragments — the total number of packets received that were
shorter than 64 octets (excluding framing bits but including FCS
octets) that had either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error)
Jabbers — the total number of packets received that were
longer than 1518 octets (excluding framing bits but including
FCS octets) that had either a bad Frame Check Sequence (FCS)
with an integral number of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error)
Octets — total number of octets received
Packets — number of packets received, broken down by size
Port Statistics Unicast packets input/output — the number of
packets, delivered by this sub-layer to a higher (sub-) layer, which
were not addressed to a multicast or broadcast address at this sub-
layer. The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including those
that were discarded or not sent.
Multicast packets input/output — the number of
packets, delivered by this sub-layer to a higher (sub-) layer, which
were not addressed to a unicast or broadcast address at this sub-
layer. The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
unicast or broadcast address at this sub-layer, including those that
were discarded or not sent.
Broadcast packets input/output — the number of
packets, delivered by this sub-layer to a higher (sub-) layer, which
were not addressed to a unicast or multicast address at this sub-
layer. The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
unicast or multicast address at this sub-layer, including those that
were discarded or not sent.
Discards input/output — the number of inbound
packets chosen to be discarded to possibly free up buffer space
Table 17: Show Port Detail Output Fields (Ethernet - Access Mode) (Continued)
Label Description

Table of Contents

Other manuals for Alcatel-Lucent 7705

Related product manuals