7705 SAR Interfaces
7705 SAR OS Interface Configuration Guide Page 175
Down — the port is administratively down
Oper Status Up — the port is operationally up
Down — the port is operationally down
Last State Change The last time the operational status of the port changed state
Chan Grp IfIndex The channel group index number
Configured Mode network — the port is configured for transport network use
access — the port is configured for service access
Encap Type The encapsulation type for the channel group (atm, cem, ipcp, or
ppp-auto)
Admin MTU The configured MTU
Oper MTU The negotiated size of the largest packet that can be sent on the
port or channel specified in octets
Scramble Indicates if payload scrambling is enabled on channel groups
(only applicable if encap type is atm)
Physical Link Yes — a physical link is present
No — a physical link is not present
Bundle Number The number assigned to the multilink bundle
Idle Cycle Flags The value transmitted by the DS0, DS1, or E1 interface during
idle cycles
Payload Fill Type The payload type to be transmitted when the circuit emulation
service is not operational or temporarily experiences underrun
conditions (only valid for CESoPSN services)
Payload Pattern Indicates the user-defined pattern transmitted if the payload fill
type is pattern
Signal Fill Type The signaling type to be transmitted when the circuit emulation
service is not operational or temporarily experiences underrun
conditions (only valid for CESoPSN with CAS)
Signal Pattern Indicates the user-defined pattern transmitted if the payload fill
type is pattern
Traffic stats Octets input/output — the total number of octets
received and transmitted on the port
Table 19: Show Port Channel Group Output Fields (Continued)
Label Description
To Next Page
Loading...
