Alcatel-Lucent 7705 - Page 190

Card, Adapter Card, and Port Command Reference
Page 190 7705 SAR OS Interface Configuration Guide
Sample Output
*A:ALU-1># show port 1/1/1.1 atm pvc 0/32
==============================================================================
ATM PVC
==============================================================================
Port Id : 1/1/1.1 VPI/VCI : 0/32
Admin State : up Oper state : down
OAM State : ETE-AIS Encap Type : n/a
Owner : SAP AAL Type : n/a
Endpoint Type : PVC Cast Type : P2P
Ing. Td Idx : 1 Egr. Td Idx : 1
Last Changed : 11/08/2007 17:02:36 ILMI Vpi/Vci Range : n/a
==============================================================================
*A:ALU-1>#
Table 27: Show Port ATM PVC VPI/VCI Output Fields
Label Description
Port Id The port ID configured or displayed in the slot/mda/port format
VPI/VCI Displays the VPI/VCI values
Admin State The administrative state of the interface connection
Oper State The status of the ATM interface
OAM State The OAM operational status of ATM connections:
Up — the interface is operationally up
ETE-AIS — the endpoint is down and is generating end-to-end AIS
OAM cells to alert the far end that it is down
Encap Type The encapsulation type
Owner Identifies the system entity that owns a specific ATM connection
Endpoint Type The endpoint type
Cast Type The connection topology type
Ing. TD Idx The ATM traffic descriptor profile that applies to the receive
direction of the interface connection
Egr. TD Idx The ATM traffic descriptor profile that applies to the transmit
direction of the interface connection