Alcatel-Lucent 7705 - Page 196

Card, Adapter Card, and Port Command Reference
Page 196 7705 SAR OS Interface Configuration Guide
Show Multilink Bundle and IMA Group Commands
multilink-bundle
Syntax multilink-bundle [bundle-id | slot/mda | type {mlppp | ima-grp}] [detail]
multilink-bundle [{bundle-id | slot/mda} | [ppp | ima] ]
Context show
Description This command displays multilink bundle information. An operator can display:
• all bundles on the system/adapter card or all bundles of a given type on the system by
specifying the value of type filter to be either mlppp or ima-grp
• bundle-specific information in summary (no detail option) or detailed format (detail option
specified) for one or more bundles
• protocol-specific information (for example, PPP or IMA) for the specified bundle
Parameters bundle-id — the multilink (PPP or IMA) bundle to be associated with this IP interface. The command
syntax must be used as follows:
Syntax: bundle-type-slot/mda.bundle-num
bundle-ppp-slot/mda.bundle-num (a multilink PPP bundle)
bundle-ima-slot/mda.bundle-num (an IMA group bundle)
bundle: keyword
slot: MDA slot numbers
bundle-num: 1 to 16 (up to 8 for MLPPP and IMA)
ppp — displays PPP bundle information
ima, ima-grp — displays IMA-type groups
mlppp — displays MLPPP-type groups
detail — provides detailed information
Output Multilink Bundle Output — The following tables describe multilink bundle output fields:
• Table 31: "Show Multilink Bundle Output Fields"
• Table 32: "Show Multilink Bundle IMA Group Output Fields"
• Table 33: "Show Multilink Bundle IMA Group Detailed Output Fields"
• Table 34: "Show Multilink Bundle MLPPP Output Fields"
• Table 35: "Show Multilink Bundle MLPPP Detailed Fields"