Card, Adapter Card, and Port Command Reference
Page 206 7705 SAR OS Interface Configuration Guide
*A:ALU-1># show multilink-bundle bundle-ppp-1/4.8 detail
===============================================================================
Bundle bundle-ppp-1/4.8 Detail
===============================================================================
Description : MultiLink Bundle
Bundle Id : bundle-ppp-1/4.8 Type : mlppp
Admin Status : up Oper Status : down
Minimum Links : 1 Bundle IfIndex : 578813960
Total Links : 0 Active Links : 0
Red Diff Delay : 0 Yellow Diff Delay : 0
Red Diff Delay Act : none MRRU : 1524
Short Sequence : false Oper MRRU : 1524
Oper MTU : 1526 Fragment Threshold : 128 bytes
Up Time : N/A Bandwidth : 0 KBit
PPP Input Discards : 0 Primary Member Port: None
Mode : network Net. Egr. Queue Pol:
===============================================================================
Traffic Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Octets 0 0
Packets 0 0
Errors 0 0
===============================================================================
Port Statistics
===============================================================================
Input Output
-------------------------------------------------------------------------------
Unicast Packets 0 0
Multicast Packets 0 0
Broadcast Packets 0 0
Discards 0 0
Unknown Proto Discards 0
===============================================================================
*A:ALU-1>#
Note: The mlppp detail command shows all bundles in the MLPPP group. The bundle-ppp
detail command shows information on the specified bundle. The fields for both commands
are the same.
To Next Page
Loading...
