Alcatel-Lucent 7705 - Page 216

Card, Adapter Card, and Port Command Reference
Page 216 7705 SAR OS Interface Configuration Guide
port
Syntax port port-id atm [interval seconds] [repeat repeat] [absolute | rate]
Context monitor
Description This command enables ATM port traffic monitoring.
Parameters port-id — specifies the physical port ID
Syntax: port-id slot/mda/port.channel
bundle-type-slot/mda.bundle-num
bundle keyword
bundle-num: 1 to 16 (up to 8 for MLPPP and IMA)
type ima, ppp
seconds — configures the interval for each display in seconds
Default 5 seconds
Values 3 to 60
repeat — configures how many times the command is repeated
Default 10
Values 1 to 999
absolute — when the absolute keyword is specified, the raw statistics are displayed without
processing. No calculations are performed on the delta or rate statistics.
rate — when the rate keyword is specified, the rate-per-second for each statistic is displayed instead
of the delta
Sample Output
*A:ALU-1# monitor port 1/1/1.1 atm interval 3 repeat 3 absolute
===============================================================================
Monitor ATM statistics for Port 1/1/1.1
===============================================================================
Input Output
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
At time t = 0 sec (Base Statistics)
-------------------------------------------------------------------------------
Octets 330260861 330260861
Cells 6231337 6231337
Unknown VPI/VCI Cells 0
-------------------------------------------------------------------------------
At time t = 3 sec (Mode: Absolute)
-------------------------------------------------------------------------------
Octets 330262504 330262504
Cells 6231368 6231368
Unknown VPI/VCI Cells 0
-------------------------------------------------------------------------------