Card, Adapter Card, and Port Command Reference
Page 218 7705 SAR OS Interface Configuration Guide
Fabric Profile Statistics Monitor Commands
fabric-profile
Syntax fabric-profile mda {mda-id | with-stats-enabled} {dest-mda | source-mda} [interval
seconds] [repeat repeat] [absolute | rate]
Context monitor
Description This command enables monitoring of adapter card fabric profile statistics. The specified adapter card
statistical information displays and automatically refreshes at the configured interval.
Parameters mda-id — the slot number of the adapter card
with-stats-enabled — if used, this keyword replaces the mda-id parameter, in which case the adapter
card that has
fabric-stats-enabled configured will be the one which is monitored; that is, the
command will be monitor fabric-profile mda with-stats-enabled dest-mda | source-mda. If
there are no adapter cards that have
fabric-stats-enabled configured, no statistics will be
displayed.
dest-mda — displays network ingress statistics for all adapter cards going towards the fabric
and destined for the specific destination adapter card. Global fabric statistics are also
displayed, as well as the fabric port statistics if the destination adapter card has the collection
of fabric statistics enabled.
source-mda — displays network ingress traffic statistics from the specified adapter card
going towards the fabric and towards a destination adapter card. The sum of traffic
forwarded or dropped is also displayed.
seconds — configures the interval for each display in seconds
Default 5 seconds
Values 3 to 60
repeat — configures how many times the command is repeated
Default 10
Values 1 to 999
absolute — displays the raw statistics without processing. No calculations are performed on the delta
or rate statistics.
rate — displays the rate-per-second for each statistic instead of the delta
To Next Page
Loading...
