Alcatel-Lucent 7705 - Chassis Location Requirements

Card, Adapter Card, and Port Command Reference
Page 72 7705 SAR OS Interface Configuration Guide
SONET/SDH Commands
config
— [no] port {port-id}
— sonet-sdh
— clock-source {loop-timed | node-timed}
— framing {sonet | sdh}
— hold-time {[up hold-time-up] [down hold-time-down]}
—no hold-time
— loopback {line | internal}
—no loopback
— [no] path [sonet-sdh-index]
— atm
— cell-format cell-format
— min-vp-vpi value
— crc {32}
— description description-string
—no description
— encap-type {atm}
— no encap-type
— mtu mtu
—no mtu
— [no] report-alarm [pais] [plop] [prdi] [pplm] [prei] [puneq]
— [no] scramble
— [no] shutdown
— signal-label value
—no signal-label
— trace-string [trace-string]
—no trace-string
— [no] report-alarm [loc] [lais] [lrdi] [lb2er-sd] [lb2er-sf] [slof] [slos] [lrei]
— section-trace {increment-z0 | byte value | string string}
— speed {oc3}
—no speed
— threshold {ber-sd | ber-sf} rate threshold-rate
—no threshold {ber-sd | ber-sf}