Interfaces
Page 444 7750 SR Interface Configuration Guide
Parameters seconds — [1-10 seconds]
retry-limit
Syntax retry-limit integer
no retry-limit
Context config>port>multilink-bundle>mlfr
Description This command specifies the value of the MLFR bundle N_RETRY counter.
The counter specifies the number of times a retransmission onto a bundle link will be attempted before an
error is declared and the appropriate action taken.
Default 2
Parameters integer — Specifies the number of retransmission attempts.
Values 1 — 5
frf.12
Syntax frf.12
Context config>port>tdm>ds1>channel-group>frame-relay
config>port>tdm>e1>channel-group>frame-relay
config>port>tdm>ds3>frame-relay
config>port>tdm>e3>frame-relay
config>port>sonet-sdh>path>frame-relay
Description This command defines the context to configure the parameters of FRF.12 frame relay fragmentation.
fragment-threshold
Syntax fragment-threshold fragment-threshold
no fragment-threshold
Context config>port>tdm>ds1>channel-group>frame-relay>frf.12
config>port>tdm>e1>channel-group>frame-relay>frf.12
config>port>tdm>ds3>frame-relay>frf.12
config>port>tdm>e3>frame-relay>frf.12
config>port>sonet-sdh>path>frame-relay>frf.12
Description This command sets the maximum length in bytes of a fragment transmitted across a frame relay port with the
FRF.12 UNI/NNI fragmentation enabled.
The no form of this command resets the fragment threshold back to the default value.
Default 128
To Next Page
Loading...
