Alcatel-Lucent 7750 - Page 445

Interface Configuration
7750 SR Interface Configuration Guide Page 445
Parameters fragment-threshold — Specifies the maximum fragment length, in bytes, to be transmitted across the FRF.12
port.
Values 128-512 bytes
mlppp
Syntax mlppp
Context config>port>ml-bundle
Description This command enables the context to configure multi-link PPP bundle attributes.
egress
Context config>port>ml-bundle>mlppp
Description This command enables the context to configure egress MLPPP QoS profile parameters for the multilink
bundle.
Default none
ingress
Context config>port>ml-bundle>mlppp
Description This command enables the context to configure ingress MLPPP QoS profile parameters for the multilink
bundle.
Default none
qos-profile
Syntax qos-profile profile-id
no qos-profile
Context config>port>ml-bundle>mlppp>egress
Description This command specifies the egress QoS profile to be used for the outgoing traffic over this MLPPP bundle.
The no form of the command removes the parameters from the configuration.
profile-id — Specifies the egress QoS profile to be used for the outgoing traffic over this MLPPP bundle.
The value can only be modified if the bundle is shutdown.
Values 1 — 128