Alcatel-Lucent ALE-500 - Page 80

Do more with your desk phone
8AL90399ENAD ed01 80/141
3.3.2 Manual configuration without wizard
You can manually configure your desk phone to connect to the selected Wi-Fi access point (SSID)
without using the wizard. Before configuring your phone, you need to know the name and the
network security key (passphrases) of the Wi-Fi access point.
• Use one of the following:
o When the configuration with the WLAN wizard fails, you can directly access the
manual configuration page by selecting: Advanced
o Select the settings icon displayed at the bottom left of the screen during the
boot (after a few seconds) → Config. MMI
(1)
→ Network → Wireless Network
(2)
• Config
o Wifi config
(1)
: press repeatedly until you set the value: User only
Validate.
o Wifi scanning
▪ Sort order: sort the result by power or name.
▪ Filter: apply a filter to the results.
• None: all scanned SSIDs are listed.
• Register: only SSIDs that are still registered are listed.
• Unregister: only non-registered SSIDs are listed.
• Autoconf: only auto-configured SSIDs are listed.
• 2.4 GHz only: only 2.4 GHz SSIDs are listed.
• 5 GHz only: only 5 GHz SSIDs are listed.
▪ Wi-Fi access points are listed (SSIDs) depending on the filter:
• The characters displayed before the SSID name represent the signal
strength: the higher the number of characters displayed (one to three),
the better the signal.
• The displayed character indicates whether the SSID is new (+), already
saved (#), defined in the configuration file (@) or currently in use (*).
▪ Select the SSID.
▪ Register
▪ Select to enter the network security key (passphrase).
▪ Validate.
▪ Validate.
▪ Check the connection by selecting: Check → Check connection.
▪ Select this icon until you see the exit icon.
o Exit the administration menu and the phone will be automatically restarted.
• Your phone is using the configured wireless network.
(1)
A password may be requested, depending on your system configuration. Contact your
administrator for more information (
2)
Depending on your system configuration, the Wireless
Network interface can be hidden by your administrator. Contact your administrator for more
information.