Installing the Hardware Getting Started
page 2-2 OmniSwitch 6860 Hardware Users Guide May 2014
Redundant AC Power. It is recommended that each AC outlet resides on a separate circuit. With
redundant AC, if a single circuit fails, the switch’s remaining power supplies (on separate circuits) can
remain operational.
• For switches using DC power, refer to the “DC Power Supply Connections” on page 3-34 for
more information.
Unpacking and Installing the Switch
To protect your switch components from damage, read all unpacking recommendations and instructions
carefully before beginning.
Unpack your OmniSwitch 6860 chassis as close as possible to the location where it will be installed.
Items Included
Your OmniSwitch 6860 includes the following items:
• OmniSwitch chassis with power supplies, per order
• Transceivers, per order
• Blank cover panel
• Rack mount brackets
• Micro USB-to-USB cable
• Country-specific power cord(s)
• Rubber table-mounting feet
• Attachment screws
• Assorted instructional cards, anti-static bags and additional packaging
Weight Considerations
Depending on model type, an empty OmniSwitch 6860 chassis weighs between 4.45 kg (9.8 lbs) and
5.03 kg (11.1 lbs).
When fully populated with power supplies and mounting brackets, the OmniSwitch 6860 can weigh up to
6.49 kg (14.3 lbs). (Weights to not include transceivers or cabling.)
To Next Page
Loading...
