Alcatel-Lucent OmniSwitch 6860E - BPS Airflow and Blank Panels

Mounting the Chassis OmniSwitch Backup Power Shelf/System (BPS)
page 4-8 OmniSwitch 6860 Hardware Users Guide May 2014
OmniSwitch BPS Airflow
The OmniSwitch Backup Power Shelf/System (BPS) power supplies are installed in power supply bays
located at the front of the chassis. Each power supply draws air through intake vents at the front of the
power supply. The air is then directed straight through each power supply and out the rear chassis vent.
OmniSwitch BPS Airflow