Chassis and Power Supplies OmniSwitch 6860 Chassis Details
OmniSwitch 6860 Hardware Users Guide May 2014 page 3-19
OS6860E-P48 Chassis Specifications
1
Fully populated weights include installed power supplies. These figures do not include transceivers.
1
Does not include attached PoE devices.
*Note On Chassis Versus Ambient Temperatures. Chassis temperature refers to the sensor reading of
the internal switch temperature (threshold or danger). Ambient temperature refers to the approximate room
temperature. The ambient temperature will typically be lower than the chassis temperature.
Chassis Status LEDs
The chassis provides a series of status LEDs located on the front panel. These LEDs offer basic status
information for hardware operation and port link and activity status.
Chassis Height 4.4 cm (1.73 in)
Chassis Width 44 cm (17.33 in)
Chassis Depth 35 cm (13.78 in)
OS6860E-P48 Chassis Weight 5.03 kg (11.1 lb)
OS6860E-P48 Chassis Weight (fully populated)
1
6.49 kg (14.3 lb)
OS6860E-P48 Power Consumption (full system power)
2
93 W
Altitude 13,000 ft
Operating Temperature (Tmra) 0°C to 45°C (32°F to 113°F)
Storage Temperature -40°C to 85°C (-40°F to 185°F)
Operating Humidity 5% to 95% non-condensing
Storage Humidity 5% to 95% non-condensing
LED State Description
OK1 Solid Green
Blinking Green
Solid Amber
System Diagnostics and AOS bootup OK
System Diagnostics and AOS in progress
(i.e., performing diagnostics or booting)
System Diagnostics and/or AOS bootup failed
VC Solid Green
Solid Amber
Off
This unit is the master unit
This unit is a slave unit
This unit is in shutdown mode or is not part of
a VC.
To Next Page
Loading...
