OmniSwitch 6860 Chassis Details Chassis and Power Supplies
page 3-20 OmniSwitch 6860 Hardware Users Guide May 2014
PS Solid Green
Solid Green
Solid Amber
Solid Amber
Off
Two power supplies are installed in the chassis
and both supplies are functioning normally.
One power supplies is installed in the chassis
and functioning normally (with the second
power supply bay empty or occupied by a
fan tray).
Two power supplies are installed in the chassis
and one or both supplies has experienced
a failure.
One power supply is installed in the chassis
and has experienced a failure (with the second
power supply bay empty or occupied by a
fan tray).
No power supply is present. (If the switch is
operating while the PS LED is off, the switch
is receiving power from an OmniSwitch BPS.)
BPS Solid Green
Solid Amber
Off
Backup power supply is operating normally
Backup power supply is operating, but a fault
is present
No backup power supply is present
GRN Solid Green
Off
Power save features are active
Power save features are off
OK2 (Enhanced
models only)
Solid Green
Blinking Green
Solid Amber
External CPU Diagnostics and AOS
bootup OK
External CPU Diagnostics in progress
External CPU Diagnostic and/or AOS
bootup failed
Port LEDs Solid Green
Blinking Green
Solid Amber
Blinking Amber
Valid port link (non-PoE)
Valid port link with activity (non-PoE)
Valid port link (PoE)
Valid port link with activity (PoE)
LED State Description
To Next Page
Loading...
