Alcatel-Lucent OmniSwitch 6860E - Airflow Considerations; Mounting the Switch

Getting Started Mounting the Switch
OmniSwitch 6860 Hardware Users Guide May 2014 page 2-3
Airflow Considerations
To ensure proper airflow, be sure that your switch is placed in a well-ventilated area and provide minimum
recommended clearance at the front, back and sides of the switch.
Never obstruct chassis air vents.
Chassis Top View
Note. Clearance is not required at the top and bottom of the chassis.
Mounting the Switch
For information on mounting OmniSwitch 6860 switches, refer to the Chapter 3, “Chassis and Power
Supplies.”
}
}
Rear. 6 inches minimum
at rear of chassis.
Front. 6 inches minimum
at front of chassis.
Sides. 2 inches minimum
at left and right sides.