Power Supplies OmniSwitch Backup Power Shelf/System (BPS)
page 4-14 OmniSwitch 6860 Hardware Users Guide May 2014
Power Supplies
OmniSwitch Backup Power Shelf/System (BPS) power supplies are located at the front of the chassis.
Refer to page 4-2 for more information on component locations. Two system power supply bays and three
PoE power supply bays are provided.
Please note that the power supplies do not provide an on/off switch. Connecting an installed power supply
to a power source will power on the power supply. Likewise, disconnecting all installed power supplies
from a power source will power off the chassis.
AC Power Supply
AC Power Supply Front Panel
Model OS-BPS-S (OS-PS-450W-A)
Input Voltage Range 100-240VAC, 50-60Hz
Nominal Voltage 115 VAC; 230 VAC
Max. Power 450W
Input Current 8A (100-132V); 4A (180-264V)
Output Rating 12V@37A
Operating Temperature 0°C to 50°C
Storage Temperature -40°C to +70°C
Humidity (Operating) 5% to 95% non-condensing
Humidity (Non-Operating) 5% to 95% non-condensing
Airflow This power supply provides front-to-back airflow only for
OS-BPS applications. See “Airflow Recommendations” on
page 4-7 for more information.
Status LED
AC Connector
Handle
Air Vent
Lock Tab
To Next Page
Loading...
