OmniSwitch Backup Power Shelf/System (BPS) OmniSwitch BPS Power Connections
OmniSwitch 6860 Hardware Users Guide May 2014 page 4-21
Connecting PoE Power
1 Insert the power cord connector into the socket at the rear of the chassis.
2 Use the retainer clip to secure the power cord to the connector.
Note. The chassis does not provide an on/off switch. Connecting a minimum of one system power supply
and one PoE power supply to a power source will power on the OS-BPS chassis and any attached
switches.
To Next Page
Loading...
