97ALI-DVR3000H Series 960H DVR User Manual
Note: Click the Refresh button if the connected local backup device cannot be displayed. When it fails to detect the backup device,
verify that it is compatible with the DVR. Format the backup device if the format is incorrect.
7. Click the Export button to start the export.
8. When the export is complete, click OK. Up to 1 M data can be exported during one operation.
8.6.4 Checking the network status
You can also check the network status and quickly set the network parameters.
1. Open the Network Trac menu. Go to Menu | Maintenance | Net Detect
2. Click the Network Detection tab to open the Network Detection menu.
SECTION 8: SYSTEM MAINTENANCE
To Next Page
Loading...
Need help?
General