19ALI-DVR3000H Series 960H DVR User Manual
2.6 Using the Menu system
After the initial setup of your DVR using the Wizard, the Menus interface enables you to rene your conguration settings and
expand the functionality of the system. To use most menus, the user must log into the DVR system, either locally or remotely, with
administrative privileges.
To open the Menu system from the Live View screen, right click anywhere in the screen, then select Menu.
If ID Authentication is not disabled (see the General Settings), a login window will open. In the Login window, select a User Name
with administrative privileges, enter its password, then click OK. NOTE: A window of Menu icons will open. The default user
“admin” has the default password of “1111”.
2.6.1 Using the Camera menu
The Camera menu lists all cameras congured in the DVR, and shows the channel, name, timestamp, etc. of each. Using this menu,
you can assign names to each camera for easy recognition, select areas for motion detection and privacy blocking, and conditions to
alarm such as video tampering and video loss.
SECTION 2: INSTALLING THE SYSTEM
To Next Page
Loading...
Need help?
General