108
SECTION 10
Cleaning
Clean the camera lens and IR lamp shield with a mild glass cleaning solution and a lint free cloth.
• Remove all foreign particles, such as plastic or rubber materials, attached to the camera housing. These may cause damage to
the surface over time.
• Dust can be removed from equipment by wiping it with a soft damp cloth. To remove stains, gently rub the surface with a soft
cloth moistened with a mild detergent solution, then rinse and dry it with a soft cloth.
CAUTION
Do not use benzene, thinner or other chemical products on the camera assembly; these may dissolve the paint and
promote damage of the surfaces. Before using any chemical product, read the instructions carefully.
SECTION 10: CLEANING
To Next Page
Loading...
Need help?
General