21ALI-DVR3000H Series 960H DVR User Manual
2.7 Conguring HDD settings
2.7.1 Checking HDD status
Check the status of the HDD installed in the DVR to assure it is functioning normally.
1. Open the HDD Information display. Go to Menu | HDD |General
2. Check the status of the HDD. If the status is:
— Normal or Sleeping - The HDD is working normally.
— Uninitialized or Abnormal - Initialize the HDD before continuing. Check the select box of the HDD to initialize, then
click the Init button at the bottom of the screen.
— Failed - If the HDD failed during or after initialization, replace the HDD.
2.7.2 Managing Network Storage
Additional le storage can be added to your DVR using up to 8 NAS disks, or up to 7 NAS disks with 1 IP SAN disk. To congure this
storage:
1. Open the HDD Information interface. Go to Menu | HDD | General
SECTION 2: INSTALLING THE SYSTEM
To Next Page
Loading...
Need help?
General