Alien Technology ALR-9800 - Notifyretrypause; Notifynow

ALIEN READER PROTOCOL CHAPTER 4
READER INTERFACE GUIDE
DOC. CONTROL # 8101938-000 REV 05
78
 The value can range from 0 to 32767.
 The default value is 3 retries.
 The period between retries is given by the NotifyRetryPause (below).
NotifyRetryCount Examples
Command
Response
>get NotifyRetryCount
NotifyRetryCount = 3
Command
Response
>set NotifyRetryCount = 0
NotifyRetryCount = 0
NotifyRetryPause
9800 | 9780 | 8780 | 9640 | 9774
When the reader attempts to send a network notification and fails, it tries again a
number of times specified by NotifyRetryCount. The time period between these
retries is specified by the NotifyRetryPause.
 The value can range from 0 to 32767 seconds.
 The default value is 10 seconds.
NotifyRetryPause Examples
Command
Response
>get NotifyRetryPause
NotifyRetryPause (secs) = 10
Command
Response
>set NotifyRetryPause = 60
NotifyRetryPause (secs) = 60
NotifyNow
9800 | 9780 | 8780 | 9640 | 9774
The NotifyNow command instructs the reader to send out an immediate
notification of its TagList to the address currently set by the NotifyAddress
command.
NotifyNow Examples
Command
Response
>NotifyNow
Issuing Notify Trigger...