Align Super Combo TREX 500PRO DFC RH50E01XT - Flight Adjustments and Notices; Starting and Stopping the Motor

Ill ustra t io n
@
~ Moveleft Move right c:=:::>
Aileron
-
Fly forward
Fly backward
=-
~
~,
~
I Elevato r
•
Ascent
When
arriving at the flying field.
Rudde r
T
hrottle
Check If the screws are fir mly tightened.
C heck if the tr ansmitt er and re ceivers are fu lly charged .
I &ClU TION I
1& elUTION I
If there are other radio contro l aircraft al the field , make sure 10check their frequencies and tell them what frequency you are using.
Frequency interference can cause your model, or other models to crash and increase the risk of danger.
STARTING AND STOPPING THE MOTOR
•
'" Ai " ""
C heck if the t hrott le slick is set at fiJ n nill
the lowest posit ion .
~ - -
l &elU TION I
First check to make sure no one else is opera tin g on the same
frequency. Then place Ihe throttle s
tick at lowest posit ion and
turn on the transmitter.
Are the rudders movi ng
accord ing to the controls?
Fo llow the transmitter's instru ction manual to do a range test.
Check the movement.
~
O N'Step 1 117
F irst t um on the transmitter.
O N ISt'P2 ~
Connect to the helicopter power
OFFI Step3
Reverse the above orders to turn
off .
39
Back to the cover