Rockwell Automation Publication 1788-UM059B-EN-P - August 2015 5
Table of Contents
Preface
Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Chapter 1
Linking Device Overview
About the Linking Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1788-EN2DNR and
1788-EN2DNROM Linking Device Features . . . . . . . . . . . . . . . . . . . . . . 12
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
EtherNet/IP Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
DeviceNet Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mounting the 1788-EN2DNR Linking Device . . . . . . . . . . . . . . . . . . . . . 13
Mounting the
1788-EN2DNROM Linking Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
DeviceNet Standard and Safety I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Add I/O Online (Online Scanlist Changes Allowed in Run Mode). . . 14
Chapter 2
Install the 1788-EN2DNROM Linking
Device
Environmental and Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Required Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Required Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Connect the
1788-EN2DNROM Linking Device to the EtherNet/IP Network . . . 17
Connect the
1788-EN2DNROM Linking Device to the DeviceNet Network . . . . . 18
Set the DeviceNet Node Address and Baud Rate . . . . . . . . . . . . . . . . . . . . 19
Set the DeviceNet Node Address and Baud Rate by Using the
Rotary Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Set the DeviceNet Node Address and Baud Rate by Using
RSNetWorx for DeviceNet Software. . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Set the Linking Device IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Set the Linking Device IP Address by Using the Rotary Switches . 20
Set the Linking Device IP Address by Using DHCP/BOOTP . . . 21
Set the Linking Device IP Address by Using RSLinx Software . . . . 23
Set the Linking Device IP Address by Using the Linking Device
Web Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Configure the Driver in RSLinx Software . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Register the EDS File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
To Next Page
Loading...
