Allen-Bradley DeviceNet 1756-DNB User Manual

Because of the variety of uses for the products described in this
publication, those responsible for the application and use of this
control equipment must satisfy themselves that all necessary steps
have been taken to assure that each application and use meets all
performance and safety requirements, including any applicable laws,
regulations, codes and standards.
The illustrations, charts, sample programs and layout examples
shown in this guide are intended solely for example. Since there are
many variables and requirements associated with any particular
installation, Allen-Bradley does not assume responsibility or liability
(to include intellectual property liability) for actual use based upon
the examples shown in this publication.
Allen-Bradley publication SGI-1.1, “Safety Guidelines For The
Application, Installation and Maintenance of Solid State Control”
(available from your local Allen-Bradley office) describes some
important differences between solid-state equipment and
electromechanical devices which should be taken into consideration
when applying products such as those described in this publication.
Reproduction of the contents of this copyrighted publication, in
whole or in part, without written permission of Allen-Bradley
Company, Inc., is prohibited.
Throughout this manual we make notes to alert you to possible
injury to people or damage to equipment under specific
circumstances.
!
ATTENTION: Identifies information about practices
or circumstances that can lead to personal injury or
death, property damage, or economic loss.
Attention helps you:
• Identify a hazard.
• Avoid the hazard.
• Recognize the consequences.
Important: Identifies information that is especially important for
successful application and understanding of the product.
Important: We recommend that you frequently back up your
application programs on an appropriate storage medium
to avoid possible data loss.
PLC-5, DeviceNetManager, FLEX I/O, and RediSTATION are trademarks of Rockwell Automation.
DeviceNet is a trademark of Open DeviceNet Vendor Association (O.D.V.A.).
Windows is a trademark of Microsoft Corp.
Microsoft is a registered trademark of Microsoft Corp.
IBM is a registered trademark of International Business Machines, Incorporated.
All other brand and product names are trademarks or registered trademarks of their respective companies.
Important
Use
r
Information

Allen-Bradley DeviceNet 1756-DNB Specifications

General

Brand	Allen-Bradley
Model	DeviceNet 1756-DNB
Category	Control Unit
Language	English