2–7Before You Begin
Publication
1756–6.5.15 – July 1998
Chapter 1 covered the configuration-process planning stage through
a data-mapping example. Chapter 3 details the configuration screens
and how to use them. Appendix A lists the possible error messages
you may see when mapping your I/O.
We recommend that you:
• use chapter 1 to become familiar with data mapping.
• use chapter 3 before configuring your communication module to
become familiar with the configuration procedure using the
software.
• use appendix A to correct scan list problems prompted by
error messages.
• use Appendix B to become familiar with data mapping with
DeviceNet Manager software
s
ex
?
Allen-Bradley Drives