Allen-Bradley DeviceNet 1756-DNB - Configuring a Device in the Scan List

3–13Configuring Through DeviceNet Manager Software
Publication 1756–6.5.15 – July 1998
The red box and the node number next to the device indicate
which scan list it belongs to.
3. Once you’ve made your changes, choose OK.
Configuring a Device in the Scan List
1. To edit your device’s I/O communication parameters, select the
device and choose Edit I/O Parameters.
When editing your devices, you can select one device or multiple
devices at a time. Highlight the desired devices and choose Edit
I/O Parameters. The entries made are then applied to all
highlighted devices.
You see this screen.
"
Allen-Bradley Drives