Allen-Bradley DeviceNet 1756-DNB - Custom Data Mapping

3–17Configuring Through DeviceNet Manager Software
Publication 1756–6.5.15 – July 1998
Input Data Map
Output Data Map
Apply Segment inserts the values from the Data Entry fields into
your scan list’s data table map.
Delete Segment removes the selected map segment from the data
table map.
Print to File prints the data table map to a text file using the .mr5
file extension.
Using the Data Table Map for Custom Editing
You can select specific bits of input data and map them to specific
communication module memory locations by following these
directions.
1. To edit the data table map, click on the radio button next to
Data Entry.
You enter the Data Table Map screen under browse mode
by default.
2. Select a device to edit from the Device Select drop list.
Whatever device appears in the Device Select field is the device
you are editing.
3. Click on the appropriate radio button in the Data Map field
depending upon whether you are mapping input or output data.
4. Click on the appropriate radio button in the Map Segment field.
"
"
"
Allen-Bradley Drives