Rockwell Automation Publication 2711P-UM006E-EN-P - January 2017 107
Windows CE Operating System Chapter 4
3. Clear View only
(inputs ignored).
4. Click OK.
5. Enter the IP address of your
terminal and click Connect.
Click the network
connection icon in the
system tray to view IP
information.
The Standard VNC Authentication dialog box opens.
6. Enter the control password that was
defined in the VNC configuration
dialog box on the terminal and click
OK.
The PanelView VNC viewer opens.
7. On your computer, perform some actions to verify that you have control of
the terminal.
8. When finished, close the PanelView VNC Server.
To Next Page
Loading...
Need help?
General
