Allen-Bradley PowerFlex 40P User Manual

3-64 Programming and Parameters
d310 [Fault 4 Code] Related Parameter(s): A100
(With FRN 3.xx and later.)
A code that represents the fourth most recent drive fault. The codes will appear in these parameters in
the order they occur (b007
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, the value of this parameter will be moved to [Fault 5 Code] and this
parameter will be overwritten by [Fault 3 Code].
Refer to Chapter
4 for fault code descriptions.
Values Default: Read Only
Min/Max: 0/122
Display: 1
d311 [Fault 5 Code] Related Parameter(s): A100
(With FRN 3.xx and later.)
A code that represents the fifth most recent drive fault. The codes will appear in these parameters in
the order they occur (b007
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, the value of this parameter will be moved to [Fault 6 Code] and this
parameter will be overwritten by [Fault 4 Code].
Refer to Chapter
4 for fault code descriptions.
Values Default: Read Only
Min/Max: 0/122
Display: 1
d312 [Fault 6 Code] Related Parameter(s): A100
(With FRN 3.xx and later.)
A code that represents the sixth most recent drive fault. The codes will appear in these parameters in
the order they occur (b007
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, the value of this parameter will be moved to [Fault 7 Code] and this
parameter will be overwritten by [Fault 5 Code].
Refer to Chapter
4 for fault code descriptions.
Values Default: Read Only
Min/Max: 0/122
Display: 1
d313 [Fault 7 Code] Related Parameter(s): A100
(With FRN 3.xx and later.)
A code that represents the seventh most recent drive fault. The codes will appear in these parameters
in the order they occur (b007
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, the value of this parameter will be moved to [Fault 8 Code] and this
parameter will be overwritten by [Fault 6 Code].
Refer to Chapter
4 for fault code descriptions.
Values Default: Read Only
Min/Max: 0/122
Display: 1

Allen-Bradley PowerFlex 40P Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 40P
Category	Controller
Language	English