Programming and Parameters 3-65
d314 [Fault 8 Code] Related Parameter(s): A100
(With FRN 3.xx and later.)
A code that represents the eighth most recent drive fault. The codes will appear in these parameters
in the order they occur (b007
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, the value of this parameter will be moved to [Fault 9 Code] and this
parameter will be overwritten by [Fault 7 Code].
Refer to Chapter
4 for fault code descriptions.
Values Default: Read Only
Min/Max: 0/122
Display: 1
d315 [Fault 9 Code] Related Parameter(s): A100
(With FRN 3.xx and later.)
A code that represents the ninth most recent drive fault. The codes will appear in these parameters in
the order they occur (b007
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, the value of this parameter will be moved to [Fault 10 Code] and this
parameter will be overwritten by [Fault 8 Code].
Refer to Chapter
4 for fault code descriptions.
Values Default: Read Only
Min/Max: 0/122
Display: 1
d316 [Fault 10 Code] Related Parameter(s): A100
(With FRN 3.xx and later.)
A code that represents the tenth most recent drive fault. The codes will appear in these parameters in
the order they occur (b007
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, the value of this parameter will overwritten by [Fault 9 Code].
Refer to Chapter
4 for fault code descriptions.
Values Default: Read Only
Min/Max: 0/122
Display: 1
To Next Page
Loading...
