Rockwell Automation Publication MOTION-UM003K-EN-P - January 2019 187
Chapter 9
Axis Configuration Examples for the
PowerFlex 755 Drive
This chapter provides example axis configurations when using a
PowerFlex® 755 drive.
The following six examples are typical axis-configuration applications for the
PowerFlex 755 drive:
• Position Loop with Motor Feedback
• Position Loop with Dual Feedback
• Velocity Loop with Motor Feedback
• Velocity Control with No Feedback
• Frequency Control with No Feedback
• Torque Loop with Feedback
Topic Page
Example 1: Position Loop with Motor Feedback Via a UFB Feedback Device 188
Example 2: Position Loop with Dual Motor Feedback Via a UFB Feedback Device 191
Example 3: Velocity Loop with Motor Feedback Via a UFB Feedback Device 196
Example 4: Velocity Loop with No Feedback 199
Example 5: Frequency Control with No Feedback 202
Example 6: Torque Loop with Feedback 206
To Next Page
Loading...
