Heater Digit (Position 6)
N - Natural Gas
R - Reduced Gas, Natural Gas (Eco Line)
S - Steam
OPL Control Suffixes
Control Digit (position 7) Actuation Digit (position 8)
Example Control Suffix Combi-
nation
D - UniLinc N - OPL DN- UniLinc, OPL
Serial Plate Location
The serial plate is located on the rear panel of the machine and is
programmed in the control. To access Machine ID Menu through
the control:
1.
Press the keypad to enter System Menu.
2.
Scroll to highlight Diagnostics and press the keypad to en-
ter Diagnostics Menu.
3.
Scroll to highlight Machine ID and press the keypad to en-
ter Machine ID Menu.
Always provide the machine’s serial number and model number
when ordering parts or when seeking technical assistance. Refer
to Figure 1 .
Introduction
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
13 Part No. 70549501ENR6
To Next Page
Loading...
