Globals Menu
Figure 26
1.
To access, press the keypad to enter the System Menu.
2. Press the or keypads to highlight Globals.
3.
Press the keypad to enter the Globals Menu.
Global Menu List Options
Display Description Default
BACK Return to previous menu
DEFAULT LANGUAGE This option will set the language that ap-
pears on the display by default. The user-
selected language will revert back to the
default language after 4.25 minutes in
Start Mode.
English
BANNERS #1-3 This option allows the owner to program a
custom message to scroll in the header of
the cycle selection menu.
PROG OUTPUT TYPE # 1-3 This option allows the owner to program
when the control provides an output that
can be used for variety of reasons.
Available ( Start Mode only)
AUDIO SIGNAL The audio signal can be programmed on or
off for key presses and end-of-cycle.
END OF CYCLE SIGNAL ENABLE ON/OFF
END OF CYCLE SIGNAL DURATION 1-120 seconds
KEYPAD ENABLE ON/OFF
END OF CYCLE EXTERNAL SIG-
NAL
ENABLE ON/OFF
Table 9 continues...
Globals Menu
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
35 Part No. 70549501ENR6
To Next Page
Loading...
