Control Identification
Operational Keypad
The control includes nine (9) keypads. These functions are avail-
able to the operator to control and manage operation of the ma-
chine. Refer to Figure 5 and Table 1 .
Figure 5
Keypad Description
UP ARROW Press to move the cursor up on the display, to scroll up through menu options, to edit
programming values or to access QR codes from the Audit Data Menu.
DOWN ARROW Press to move the cursor down on the display, to scroll down through menu options or
edit programming values.
LEFT ARROW Press to move cursor left on the display, to scroll left through menu options or edit pro-
gramming values.
RIGHT ARROW Press to move cursor right on the display, to scroll right through menu options or edit
programming values.
STOP Press to pause and stop a running cycle.
START/ENTER Press to start a cycle or press and hold to rapid advance a machine cycle during Rapid
Advance Mode. Also, press to select menu items and save edited programming values
when used in programming menus.
HELP/INFO Press to enter the Cycle Options Menu from the Cycle Selection Menu or press and hold
to show error message if error indicator is shown.
SETTINGS Press to display the System Menu.
HOME Press to display the Cycle Selection Menu.
Table 1
Operation Modes
In each mode of operation, the user may press keypads or com-
municate with the control to change the displayed menu.
Power-Up Mode
The control enters this mode at power-up. After the control com-
pletes operation in Power-Up Mode it will enter Start Mode. The
display will show a clock during Power-Up Mode.
Control Identification
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
17 Part No. 70549501ENR6
To Next Page
Loading...
