Programming Control
System Menu
Figure 15
The System Menu allows the user to access Rapid Advance (Rap-
id Advance Mode), Advanced Info (Advanced Info Menu), Modi-
fy Cycle (Modify Cycle Menu), Globals (Globals Menu), Audit
Data (Audit Data Menu), Diagnostics (Diagnostics Menu), Serv-
ice Schedule (Service Schedule Menu) and Reset (Reset Menu).
To access, press the keypad.
Save Changes Menu
Figure 16
The Save Changes Menu is used to confirm programming
changes when modifying a cycle, changing the parameters in the
Globals Menu or using the Reset Menu.
Select EXIT, DON'T SAVE to revert to the previous menu level
without saving changes. Select SAVE AND EXIT to save
changes and revert to the previous menu level.
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
28 Part No. 70549501ENR6
To Next Page
Loading...
