Audit Data Menu
The Audit Data Menu allows the user to read audit data via the
keypads rather than using infrared or network communications.
Figure 27
1.
To access, press the keypad to enter the System Menu.
2. Press the or keypads to highlight Audit Data.
3.
Press the
keypad to enter the Audit Data Menu.
View Audit Data on the Display
Figure 28
1. From the Audit Data Menu, press the keypad to highlight
Audit Data.
2.
Press the keypad to enter Manual Read Audit Data Mode.
The display will show the following audit parameters:
• Total number of machine cycles
• Total number of rapid advance cycles
• Total number of run hours
• Total number of aborted cycles
• Total heat hours
• Average cycle end to door open minutes
• Average cycle end to run mode minutes
• Anti-wrinkle time exceeded
• Individual cycle counts 1-48
Audit Data Menu
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
39 Part No. 70549501ENR6
To Next Page
Loading...
