Modify Cycle Menu
The Modify Cycle Menu allows the user to manually program cy-
cles through the control by modifying existing cycles or by creat-
ing new cycles.
1.
To access, press the keypad to enter the System Menu.
2. Press the or keypads to highlight Modify Cycle.
3.
Press the keypad to enter the Modify Cycle Menu.
For programming steps, the Modify Cycle Menu changes to the Step Menu.
Cycle Programming
Display Description Value Range
BACK Select to return to System Menu.
#01-48: <Cycle Name> Default cycle number and name. Select a
cycle from the list to modify.
There are 48 default cycles.
BACK Select to return to higher menu.
CYCLE NAME Default cycle name. Select to change the
cycle name.
20 characters maximum
CYCLE ENABLE Select to enable or disable selected cycle. Enable/Disable
CYCLE TYPE Select to choose dry type. Time Dry, Auto Dry, Moisture Dry
MATERIAL TYPE Select to set material type. Cotton, Blend, Bedding, Delicates, Syn-
thetic, Wool
TIME PAST TARGET
NOTE: Advanced moisture dry op-
tions must be enabled in globals for
Time Past Target parameter to appear.
Select to modify dry time in minutes past
target.
0-15 minutes (moisture sensing cycle on-
ly)
<Parameter Name>
Step 1-5 (only if multi-step cycles ena-
bled in globals)
Step Number. Available parameters and
value ranges differ for each cycle type. Re-
fer to Modify an existing or copied cycle.
Refer to Time Dry Cycle (Table 4 ), Auto
Dry Cycle (Table 5 ), Moisture Dry Cycle
(Table 6 )
COOL DOWN Select to modify cool down options. Temperature, Time, Enable/Disable Step
Reversing; Refer to Cool Down Cycle (Ta-
ble 7 )
REVERSING Select to modify reversing options. Cycle Reversing, Rotate Time, Stop Time;
Refer to Reversing Cycle (Table 8 )
COPY CYCLE Select to copy a cycle that can be inserted.
INSERT CYCLE Select to place and insert a new cycle. Re-
fer to Create a new cycle.
Table 3
Modify Cycle Menu
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
32 Part No. 70549501ENR6
To Next Page
Loading...
